How to Install Exterior Siding

1. Measure Exterior Walls · 2. Order Siding · 3. Prime or Coat Wood Siding · 4. Attach Weather-Resistive Barrier · 5. Measure For Furring Strips · 6.


What goes under exterior siding?

Underlayment or weather resistive barrier (WRB) is installed between the siding and the sheathing. This can be tar paper or a house wrap such as HardieWrap® or Tyvek HomeWrap®. HardieWrap® is great for keeping water out and at the same time letting water vapor escape from the house.

What is the easiest type of siding to install?


Compared to other sidings, vinyl is one of the easiest to install. It cuts easily, can be put up quickly, and requires no painting.

How do you install exterior vinyl siding?

How do you install siding panels?

Do you need Tyvek under siding?

There is no logical reason not to have house wrap under vinyl siding, and many authorities strongly agree that it should be viewed as mandatory, even if your local building codes don’t necessarily require it. Vinyl siding is one of, if not the most popular exterior cladding for residential homes.

Does siding need to be nailed into studs?

Siding must be secured into metal studs if the substrate is not a nailable surface such as exterior dry wall, gypsum board, etc.

Do you put plywood under siding?

The wood that goes under residential siding – exterior sheathing – performs several functions. It adds insulation, waterproofing and structural support for the framing. It also provides a surface on which to nail the siding. The most common sheathing materials include oriented strand board and plywood.

Can you do siding yourself?

Choosing the DIY Route: Siding Installation is Not for Beginners. If you don’t have any experience with installing siding on a house, it’s probably best that you reach out to a trained contractor for the job. While it looks relatively straightforward, installing siding isn’t a job for beginner DIYers.

How do you fasten siding?

Vinyl Siding Installation Tips

  1. Allow for Expansion and Contraction. …
  2. Choose the Right Nails. …
  3. Don’t Drive the Nails Tight. …
  4. Center the Nails in the Vinyl Siding Slots. …
  5. Keep the Nails Straight and Level. …
  6. Don’t Face-Nail. …
  7. Never Pull Siding Taut When Nailing. …
  8. Space the Nails Properly.

How do you start siding on a house?

How do you nail siding a house?

How do you install flashing under siding?

Can you apply house wrap directly to studs?

Tyvek® has been used directly over studs where there is no sheathing, although use of sheathing is a highly recommended building practice.

Do you tape the bottom of house wrap?

Flashing tape at the top should bridge the gaps between the window unit and the wall sheathing, for air sealing as well as water management. DO NOT tape over the bottom flange because you will block the drainage path.

Can you use roofing felt under siding?

The short answer is that felt paper is fine as a weather-resistant barrier behind vinyl siding and will not cause a problem if the siding is installed correctly.

What nails do you use for siding?

The best type of nails to use for siding include hot-dip galvanized nails, which boast strength and durability to complete your siding installation successfully.

Maybe you are interested in:

How to Install Fiber Cement Siding

Related searches

  1. how to install vertical wood siding
  2. how to install clapboard siding
  3. how to install wood siding on a shed
  4. how to install 4×8 wood siding
  5. wood siding panels
  6. wood siding installation cost
  7. wood siding exterior
  8. engineered wood siding

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button